Por favor, use este identificador para citar o enlazar este ítem: https://hdl.handle.net/20.500.12759/11123
Título : Diseño del sistema de agua potable y UBS en los centros poblados Pashagón y Casumaca - Huamachuco, departamento de la Libertad
Autor : Benites Velásquez, Daniel Anthony
Flores Casas, Lucas Noe
Asesor: Medina Carbajal, Lucio Sigifredo
Palabras clave : Agua Potable
Abastecimiento
Fecha de publicación : 2023
Institución : Universidad Privada Antenor Orrego
No. de serie: T_CIVIL_2281
Resumen : El presente trabajo de tesis tuvo como objetivo general realizar una propuesta del diseño del sistema de agua potable y UBS en los centros poblados Pashagón y Casumaca - Huamachuco, departamento de La Libertad, los cuales tienen una gran problemática en donde sus sistemas de agua potable y de alcantarillado se encuentran en mal estado o en algunos casos no existe, situación que pone en riesgo la salud de la población de tal modo que surge una necesidad de brindar una solución a este problema, para ello se realizó un levantamiento topográfico y la excavación de calitas de ambos centros poblados que fueron usados como estudios básicos para el proyecto. En el diseño de sistema de agua potable contará con 1 captación, una cámara de división de caudales, 1 reservorio de 10 m3 para Pashagón y 1 reservorio de 10 m3 para Casumaca, para la línea de conducción principal de la Captación- cámara de división de caudales (CDC) se tendrá Tubería PVC Ø 1 ½ "" de clase 7.5 con una longitud de 1990.53 m y la colocación de 2 válvulas de aire 1 válvula de purga en su trayectoria, para el tramo de (CDC-Reservorio Casumaca) Tubería PVC Ø 1 "" de clase 5 con una longitud de 270.26 m , 1 válvula de aire y 1 válvula de purga, para el tramo (CDC-Reservorio Pashagón) Tubería PVC Ø 1 "" de clase 7.5 con una longitud de 2462.02 m, cabe resaltar que en este tramo se usaron 3 cámaras rompe presión de tipo 6, 3 válvula de purga y 4 válvulas de aire . Asimismo, el sistema de aducción utilizará tuberías PVC de Ø 1” de clase 5 para Pashagón y de Ø 1 1/2” de clase 5 para Casumaca. Para las redes de distribución de ambos centros poblados se usará en su mayoría tuberías PVC de Ø 3/4” de clase 7.5 excepto en algún tramo que se usará tubería PVC de Ø 1” para cumplir con las presiones y velocidades según la norma vigente NTP 399.002:2015 En cuanto al diseño de las UBS se tendrá en Casumaca un total de 108 unidades mientras en que Pashagón 60 unidades, las cuales serán casetas de un área de 3.35 m2 con un biodigestor de 600 litros y para el tratamiento de los líquidos efluentes se usará Pozo de Absorción el cual fue determinado mediante el test de percolación.
The present thesis work had as a general objective to make a proposal for the design of the drinking water and UBS system in the Pashagón and Casumaca - Huamachuco populated centers, department of La Libertad, which have a great problem where their drinking water and sewage systems are in poor condition or in some cases does not exist, a situation that puts the health of the population at risk in such a way that a need arises to provide a solution to this problem, for which a topographical survey was carried out and the excavation of coves of both populated centers that were used as basic studies for the project. In the design of the drinking water system, it will have 1 intake, a flow division chamber, 1 10 m3 reservoir for Pashagón and 1 10 m3 reservoir for Casumaca, for the main conduction line of the Intake-water division chamber. flows (CDC) there will be a PVC pipe Ø 1 ½ ""class 7.5 with a length of 1990.53 m and the placement of 2 air valves 1 purge valve in its path, for the section of (CDC-Casumaca Reservoir) PVC pipe Ø 1 ""class 5 with a length of 270.26 m, 1 air valve and 1 purge valve, for the section (CDC-Pashagón Reservoir) PVC pipe Ø 1 ""class 7.5 with a length of 2462.02 m, it should be noted that in this section, 3 type 6 pressure-break chambers, 3 purge valves and 4 air valves were used. Likewise, the adduction system will use Ø 1"" class 5 PVC pipes for Pashagón and Ø 1 1/2"" class 5 pipes for Casumaca. For the distribution networks of both populated centers, the majority of Ø 3/4"" class 7.5 PVC pipes will be used, except in some section that Ø 1"" PVC pipe will be used to comply with the pressures and speeds according to the current standard. NTP 399.002:2015 Regarding the design of the UBS, there will be a total of 108 units in Casumaca, while in Pashagón there will be 60 units, which will be booths with an area of 3.35 m2 with a 600-liter biodigester and a Well will be used for the treatment of effluent liquids. Absorption which was determined by the percolation test.
URI : https://hdl.handle.net/20.500.12759/11123
Aparece en las colecciones: Ingeniería Civil

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
REP_DANIEL.BENITES_LUCAS.FLORES_DISEÑO.DEL.SISTEMA.DE.AGUA.pdf11,84 MBAdobe PDFVisualizar/Abrir
AUTORIZACION.BENITES.FLORES.pdf
  Restricted Access
212,58 kBAdobe PDFVisualizar/Abrir  Request a copy
TURNITIN.BENITES.FLORES.pdf
  Restricted Access
5,74 MBAdobe PDFVisualizar/Abrir  Request a copy


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons